The lowest on your roof
The Contour Cooler is the least obtrusive evaporative cooler in Australia. Its patented sloping base offers the lowest profile on your roof, which is ideal if you don't want to alter the look of your home. The Contour is also available in the five most popular roofing colours in South Africa.

The most advanced technology
The Contour Cooler has unique features which make it far more effective at cooling your home than other coolers while requiring the least amount of water and maintenance. Every stage of the Contour's operation has been thought about and designed to make the cooler's operation more reliable, discreet and healthy for you.

When you turn your cooler on inside the home, the Contour begins its Pre Wet cycle. Clean, fresh water enters the cooler and begins soaking the cooling pads before the fan even starts. This ensures that once the fan does start, the pads will provide you with cool air inside your home immediately.

The unique shape of the Contour's base means it holds up to a third less water than other coolers, saving valuable water during the hot South African summer months.

Brivis coolers are the only ones that use a pump which sits in its own sealed waterproof chamber, ensuring that the pads are soaked in clean water all the time. The Synchro-drive pump also performs self-diagnosis to ensure that if anything is obstructing the water flow, it spins in the opposite direction to clear it.

The water is pumped into the unique Brivis Aqua-Duct. With large channels and drain holes, every pad is saturated, evenly and quickly. Once the pads are saturated, the fan turns on.

The Aqua-Duct	The Synchro drive pump

The Contour has a variable speed fan which gives you a wide range of speeds and allows the cooler to run much slower than other coolers. This is great on a hot night when all you want is a gentle breeze to keep you cool so you can get to sleep.

The air is pushed from the fan through the unique Contour ServoSeal and into the ductwork in your ceiling. The ServoSeal is the only motorised cooler seal on the market. The seal is important because it retains warmth inside your house on a cold day when it's closed, and manages the airflow when it's open. The ServoSeal does this by directing air straight down into your ducts rather than turbulent air directly from the fan. This increases cool airflow into your home and reduces noise.

The Contour uses the Trident Water Sensor to manage the number of times it adds clean water into the cooler while the cooler is operating. After 20 refills, it initiates a Running Refresh which automatically flushes the entire tank and refills it with clean water. This ensures the cooler doesn't dump and refill water unnecessarily which therefore saves water. When you turn your cooler off, the Contour automatically runs a Fresh Start operation. The tank is emptied and thoroughly flushed clean which means that there is no dirty water or sediment sitting in the cooler before it starts up again.

The Trident	The ServoSeal

Guaranteed to last
The Contour Cooler is designed and made in Australia to withstand our variable and often harsh climate. The plastic housing is made of a tough UV-stabilised plastic to resist the sun's rays, and is designed for strength and durability. The Contour's high tech electronics are easy to access and are kept dry in a safe, watertight casing for added longevity.

The most choices
The Contour has several different options and models to choose from so that you can select the right cooler for your needs. Brivis dealers and installers are carefully selected and trained by us to help you get the most from your investment. So talk to them or call us on (011) 704 6112 to discuss your options.

The Contour has three controller options - the Networker, the Programmable or the Manual Controller.

Key Points

• A unique patented sloping base makes the Contour the lowest on your roof.
• Comes in the 5 most popular roofing colours in South Africa .
• The contours ServoSeal is the only motorised seal on the market.
• The Contour's high tech electronics and Synchro-drive pump are housed in waterlight casings to ensure their reliability.
• Our Brivis trained installers and dealers can help you make the right decision for your home.
• The contour cooler is made from tough UV-stabilised plastic to resist the sun's rays